AMETEK CTS 3.0 - Manual (Page 68)

Compliance Test System 3.0 User Manual
64
SUB MENU DESCRIPTION
Save Test Setup Saves only the setup information in effect. The setup file name depends on
the setup. For example, a steady state Class D test would have a name of
Steady_D.cts_setup.
Save Test Data Saves all data from the most recent test run. A test must be run first with
data saving enabled. When data saving is enabled, a test will produce a
binary file H-xxxxxx.cts_data (harmonics) or F-xxxxxx.cts_data (Flicker)
where xxxxxx is the test number. Save test data menu action actually make
a copy of that binary file to the specified file name and location.
The file name used will be the same as used for the previous save
operation unless this is the first save after a test run. In that case, the user
will be prompted for a file name.
Save Test Data As Saves a copy of the most recent test run binary data to a new file name.
The user will be prompted for a name to use.
Report Generate data needed for a test report and if MS Word is installed on the
PC used, allows producing/viewing/printing a test report in MS Word.
The MS Word version supported is Word 9.0 (Word 2000). Older
versions of MS Word may no longer work when upgrading to the
latest CTS 3.0.XX software version. In that case, a newer version of
MS Word may have to be installed.
Report Preview Previewing a test report in MS Word. MS Word must be installed on the PC
used.
Print Report Printing a test report in MS Word. MS Word must be installed on the PC
used.
Exit Terminates and exits the CTS 3.0 program
4.4 Edit Menu
The Edit menu offers the following sub-menu choices.
SUB MENU DESCRIPTION
Copy Top Graph Copies a bitmap image of the top graph displayed to the Windows
Clipboard. From there, it can be pasted into other Windows programs.
Copy Bottom Graph Copies a bitmap image of the bottom graph displayed to the Windows
Clipboard. From there, it can be pasted into other Windows programs.
Edit Header The Header is printed at the top of each report page. This sub menu brings
up a dialog box that allows the header to be edited. For testing on behalf of
a third party, this feature allows the test lab name to be printed on each
report page.