AMETEK CTS 3.0 - Manual (Page 120)

Compliance Test System 3.0 User Manual
116
10.6 User Observations
The CIGUI32 or CIGuiSII provides a data entry window for the operator. Observations made
about the EUT can be entered in this window before, during and after a test run. Any information
entered by the operator in this window will be incorporated in the test report when printed.
10.7 Report Format- 417 Test Files
The IEC 61000-4-17 test module produces a test report when the Print Report button is clicked.
Reports can also be printed from the File, Print menu. Test reports include all selected test
parameters and options. A sample test report is shown below. The report format used can be
direct output to a printer or generation of an MS Word report. The desired report format can be
selected from the Options menu, under IEC Report Setup. MS Word reports are automatically
saved in the C:\Program Files\California Instruments\Cigui32\Reports or C:\Program
Files\California Instruments\CiguiSII\Reports directory.
10.8 Saving and Loading Test Setups
Frequently used test setups can be save to disk by using the File, Save or File Save As menu
entries. Setup files for IEC 61000-4-17 tests have a ".417" file extension.
To select a previously saved test setup, use the File, Open menu entry and select the desired file
from the file open dialog.
Figure 10-3: IEC 61000-4-17 User Observation Data Entry Window