Adept s650 Viper - Manual (Page 12)

Chapter 1: Introduction
Adept Viper s650/s850 Robot with MB-60R/eMB-60R User’s Guide, Rev F
Page 12 of 100
DANGER: This indicates an imminently hazardous sit-
uation which, if not avoided, will result in death or
serious injury.
WARNING: This indicates a potentially hazardous elec-
trical situation which, if not avoided, could result in
injury or major damage to the equipment.
WARNING: This indicates a potentially hazardous sit-
uation which, if not avoided, could result in injury or
major damage to the equipment.
CAUTION: This indicates a situation which, if not
avoided, could result in damage to the equipment.
NOTE: Notes provide supplementary information, emphasize a point or procedure,
or give a tip for easier operation.
1.3 Intended Use of the Robots
The Adept Viper robots are intended for use in parts assembly and material handling for pay-
loads less than 5 kg. See Technical Specifications on page 83 for complete information on the
robot specifications. Refer to the
Adept Robot Safety Guide for details on the intended use of
Adept robots.
1.4 Safety Precautions
DANGER: An Adept Viper s650/s850 robot can cause
serious injury or death, or damage to itself and other
equipment, if the following safety precautions are not
observed:
l All personnel who install, operate, teach, program, or maintain the system must read
this guide, read the
Adept Robot Safety Guide , and complete a training course for their
responsibilities in regard to the robot.
l All personnel who design the robot system must read this guide, read the Adept Robot
Safety Guide , and must comply with all local and national safety regulations for the