Echelon IzoT Commissioning Tool - Manual (Page 362)

Warnings Options
The Warnings category contains the following options, which are all selected by default.
Enable Warning When
New Device Requires
Commissioning
Displays a message when you create a new device that needs to be
commissioned.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Warning When
Functional Block has
no Matching Device Displays a message when you drag a functional block SmartShape
onto a drawing but there is no compatible device on the drawing
page. You will be prompted to select another subsystem.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Warning When
Commissioning OffNet Displays a message when you commission a device or router
while IzoT Commissioning Tool is OffNet. Commissioning while
IzoT Commissioning Tool is OffNet sets the Neuron ID of the
device SmartShape, but it does not affect the physical device.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Warning When
Incompatible
Application is Loaded Displays a message if you attempt to load an incompatible
application image into a device.
Scope: Current network, current IzoT Commissioning Tool
computer
Enable Warning
Before Upgrading
NSD
Displays a message when upgrading the OpenLNS network
interface, which is represented by the network service device
(NSD) SmartShape in the OpenLNS CT drawing.
IzoT Commissioning Tool upgrades the network interface when
you upgrade from a version of IzoT Commissioning Tool before
346 Appendix A - Setting IzoT Commissioning Tool Default Options