Echelon IzoT Commissioning Tool - Manual (Page 340)

Configuration Properties Options
The Configuration Properties category contains the following options.
Enable Configuration
Properties Enables access to configuration properties. This option is selected
by default.
Also enables automatic extension record copying. When this check
box is selected, a device’s extension records that are marked for
copying will automatically be copied when you create a new device
by copying an existing one and when you create a new custom
device master SmartShape.
If this check box is cleared, you will not be able to view or modify
configuration properties from IzoT Commissioning Tool. This
speeds up the OpenLNS CT Browser, but reduces your ability to
configure your devices from IzoT Commissioning Tool.
Scope: Current network, all IzoT Commissioning Tool computers
Configuration Property
Options
Warn if no Default in
XIF Notifies you if you have requested to copy default configuration
property values to a device, but the device template was created from
a device interface (XIF) file with no default configuration property
values. The device manufacturer must include default configuration
property values in their XIF file for default configuration property
values to be used.
This check box is only available if the Enable Configuration
Properties check box has been selected, and it is selected by default.
Scope: Current network, all IzoT Commissioning Tool computers
324 Appendix A - Setting IzoT Commissioning Tool Default Options