Nortel Networks T7316 - Manual (Page 81)

Chapter 6 Forward your calls 81
Telephone Features Programming Guide
To enter the telephone number to which you want to redirect calls, use one of the following
methods:
• Press an external autodial button.
• Enter an external telephone number (using no more than 24 digits) then press ≥ or OK.
• Press ≥ or OK if the line you have selected as the outgoing line is a private network line
that does not require you to dial digits.
4 Select the lines to redirect.
If you use ALL to redirect all your lines, ensure that you wait until all the lines on your telephone
light up before pressing ≥ or OK. If you press ≥ or OK
before all the lines light up, those lines
not lit do not redirect.
You can continue to use the line selected for redirecting calls on other lines when the line is not
busy on a redirected call. To avoid redirection failing because the selected line is in use, select a
line pool with several lines in it. The system does not check that the number you give for line
redirection is a valid one. If you redirect to an invalid number, redirection fails. To avoid a
redirections failure, use an autodial button to enter the redirection number. You must program
autodial buttons used for line redirection to use a specific line.
Cancel Line Redirection
To cancel Line Redirection:
1 Press ≤£°›.
2 Select the lines you no longer want to redirect.
Line Redirection prompts
The following displays appear when redirecting lines:
You selected the intercom button as the facility on which to place the
call. Enter a line pool code or a destination code.
Press • or ADD to begin redirection. Press £ or REMOVE to cancel a
previous redirection.
You have one external line on your telephone, but you need a second
line to perform line redirection. Redirect your external line using a line
pool as the outgoing line.
You are trying to redirect a line and the line you have selected is the
outgoing line you have selected as a destination. You cannot redirect a
line to itself. Select another line.
Enter a valid line pool access code.
Intercom
Line Redirection
QUIT ADD REMOVE
No line to use
Outgoing line
Pool code: ___
QUIT