Making a telephone a hotline telephone, Control telephone, Set lock – Nortel Networks T7316 User Manual
Page 124
124
Chapter 11 System features
P0937240 03.1
Making a telephone a hotline telephone
(Unified Manager Programming)
You can set up a telephone as a hotline.
You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide.
The Internal option assigns an internal number. The External option assigns an external number. If
you select an external number, you can select the line on which the call is made: the prime line, an
external line, a line in a line pool, or a line selected by the routing table. If you select a line pool,
you must indicate the line pool access code. If you select the routing table, the number dialed is
considered as a destination code and routes according to the routing tables.
The installer programs a prime line, line pool access codes, and access to a line pool.
Control telephone
(Unified Manager Programming)
The control telephone allows you to place the telephones and external lines for which it is
responsible into and out of service schedules. See
“Use alternate or scheduled services” on page
.
Control telephones are defined for each telephone record by the system administrator during setup.
You need to start a Unified Manager session to program this feature. For more information about
programming using the Unified Manager, see the Business Communications Manager
Programming Operations Guide.
Set lock
(Unified Manager Programming)
Set lock limits your ability to customize a telephone. There are three levels of Set Lock:
•
None: allows you to access all features on your telephone.
•
Partial: prevents:
•
Full: includes the restrictions described for Partial lock, and also prevents:
•
programming autodial buttons
•
programming the user speed dial numbers
•
programming feature buttons
•
moving line buttons
•
changing the display language
•
changing dialing modes
(Automatic Dial, Pre-Dial, and Standard Dial)
•
using Voice Call Deny
•
saving a number with Saved Number Redial
•
changing Background Music
•
changing Privacy
•
changing Do Not Disturb
•
using Ring Again
•
using Call Forward all calls
•
using Send Message
•
using Trunk Answer
•
activating Services