Nortel Networks T7316 - Manual (Page 91)

Chapter 7 Communicating in the office 91
Telephone Features Programming Guide
Voice Call
You can make an announcement or begin a conversation through the speaker of another telephone
in the system.
Make a Voice Call
To make a Voice Call:
1 Press ≤flfl.
2 Follow the instructions on the display.
Mute Voice Call tones
When a voice call begins at your telephone, you hear a beep every 15 seconds as a reminder that
the microphone is on. To stop the beep, pick up the handset or press the handsfree button.
Answer a Voice Call using Handsfree Answerback
With Handsfree Answerback assigned to your telephone, you can respond to a voice call without
touching the telephone.
When a person makes a voice call to you, just start talking. The microphone on the telephone picks
up your voice.
After you have answered a voice call, you can put the call on hold, transfer it, or treat the call as a
normal call.
Handsfree Answerback is not available to the T7100 telephone or the portable telephones.
You are at the beginning of your list of messages. Press NEXT to move
through your messages.
You are trying to send a message to a user whose message waiting list is
full.
You tried to send a message but your list of sent messages is full.
Cancel one of the messages you sent, if possible, or wait until you have
received a reply to one of those messages.
For other displays, see Appendix B, “Common display prompts and error messages,” on page
167 .
Note: Voice calls made to portable handsets that do not have speakers, such as
Companion, the T7406 cordless handset, and NetVision telephones, will receive the call as
a ringing call.
Start of list
NEXT
Their list full
Your list full