Nortel Networks T7316 - Manual (Page 50)

50 Chapter 3 Make a call
P0937240 03.1
Make a priority call
You can make a priority call only while your telephone display shows the following:
To make a priority call:
1 Press ≤fl·.
2 Wait for a connection, then speak.
A person who receives a priority call while on another call has eight seconds to accept or block the
call. For information about blocking calls see
“Stop calls” on page 112 . If the person does nothing,
the priority call feature puts their active call, including conference parties, on Exclusive Hold and
connects your call.
The display may show one of the following:
Ring Again
Use Ring Again when you call a person on your system and their telephone is busy or there is no
answer. Ring Again can tell you when they hang up or next use their telephone. You can use Ring
Again to tell you when a busy line pool becomes available.
Turn on Ring Again
To turn on Ring Again, press ≤¤ before you hang up.
Using Ring Again cancels any previous Ring Again requests at your telephone.
The telephone you want to transfer to is busy.
You initiated the Priority call transfer to this local.
The telephone you want to transfer to has Do Not Disturb active.
The telephone you want to transfer to is on another call.
You tried to place a priority call to another telephone in your system.
The person you called has blocked your call. Try to call later.
The party you are calling has eight seconds to decide to accept or reject
your priority call.
The telephone you are calling is receiving a priority call at the same
time or cannot receive priority calls.
221 busy
PRIORITY LATER
Calling 221
PRIORITY LATER
Do not disturb
PRIORITY LATER
On another call
PRIORITY LATER
Call blocked
Please wait
Priority denied