Nortel Networks T7316 - Manual (Page 101)

Chapter 9 Customize your telephone 101
Telephone Features Programming Guide
Button inquiry
You can check the function of any line, intercom, or programmed button on your Business
Communications Manager telephone by pressing
≤•‚ and a button.
• On T7100/M7100(N) telephones, Button Inquiry shows your internal number followed by the
function assigned to your single memory button.
These are some of the displays that appear for this code:
Programming feature codes
You can program a feature code to a memory button.
Any memory button not programmed as an external or internal line, target line, Answer button, or
Handsfree/Mute button, is available for features.
1 Press ≤•‹.
2 Press the memory button you want to program with a feature.
3 Enter the appropriate feature code you want to assign to the button.
You cannot program the following feature codes on a memory button: Long Tones and any code
beginning with • except ≤•fi‚⁄ (Language Option), ≤•‡ (Contrast
Adjustment). and SWCA line buttons.
You cannot program any feature code on a NetVision handset that requires the use of the volume
bar for input.
The display shows the number and name of the line. Press SHOW to
view the redirection status of the line.
Press £ or press VIEW ‚ or · VIEW to view a number that is too long to
fit on the display. Press ≥ or OK when done.
The display shows the directory number of the telephone, and the
assigned name. Press NEXT to see the first line assigned to ring at the
intercom button.
The name of the feature assigned to a button appears on the display
when you press the button. Press £ or SHOW for additional
information.
Press the button you want to check. Press ≤ or EXIT when
finished.
For other displays, see Appendix B, “Common display prompts and error messages,” on page
167 .
Note: When you program a button with the line pool feature code, you must enter a line
pool access code after the feature code. The programmed line pool button accesses a
specific line pool, not the line pool feature.
061
SHOW OK
123456789012345...
VIEW‚ OK
221
NEXT VIEW‚
SHOW OK
Press a button
EXIT