Nortel Networks T7316 User Manual
Page 46
46
Chapter 3 Make a call
P0937240 03.1
You have dialed a number, but the least expensive route programmed for
the system is busy. Unless you release the call, the number goes through
on a more expensive route.
The last number you dialed or the number you saved for Saved Number
Redial was a speed dial number that displayed a name instead of the
number. You dialed the number correctly, but it is not visible.
You have tried to use another person’s private line.
Enter the digits of the number you want to dial.
You have not dialed an external telephone number since the last power
interruption or system reset.
Either you have no prime line or your prime line is busy. Select a line
manually before dialing.
You have entered the number of a telephone that is not in service.
The telephone you have called is on another call. Press LATER to use the
Ring Again or Message features.
System programming has a restriction configured for the call you are
trying to make. A possible reason is time-of-day restrictions for some
calls.
Press YES to use Ring Again. Press NO to send a message. See
and
“Turn on Ring Again” on page 50
Either you have no prime line, or the prime line is in use, or the line
programmed for an autodial number, speed dial number, or Hotline is in
use. Select a line and dial again.
Press YES to send a message. See Messages.
The Last Number is not allowed.
Appendix B, “Common display prompts and error messages,” on page
.
Note:
To make a call on a NetVision or NetVision Data telephone, enter all the digits you
need for the call, then press the
key.
Expensive route
Hidden number
Line denied
Line061
TRANSFR
No last number
No line selected
Not in service
On another call
LATER
Restricted call
Ring Again?
YES
NO
EXIT
Select a line
Send message?
YES
NO
Denied in Admin
SND
SND