Nortel Networks T7316 - Manual (Page 115)

Chapter 10 Telephone features 115
Telephone Features Programming Guide
Change Handsfree for a telephone
(Unified Manager Programming)
You can program the type of Handsfree used with each telephone or activate Handsfree
Answerback.
You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide.
Handsfree Answerback
(Unified Manager Programming)
Handsfree Answerback allows you to answer a voice call without lifting the handset.
Handsfree Answerback is always turned off for T7100, Companion, DECT, T7406, and NetVision
telephones.
You can turn Handsfree Answerback on or off for a telephone programmed to use Handsfree. You
need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide.
Hearing aid compatibility
The handsets on all system telephones are compatible with hearing aids as defined in the FCC
rules, Part 68, section 68.316. Not all hearing aids are optimized for use with a telephone.
Call Duration Timer
Press ≤‡‡ to see how long you were on your last call, or how long you have been on your
current call.
Accidental disconnect
If you accidentally drop the handset back into the telephone cradle while answering a call, you can
retrieve the call.
Pick up the handset again or press the handsfree button within one second to reconnect to your call.
The display shows the last call you made, or the total elapsed time in
minutes and seconds on a current call.
You parked your last call. You cannot see the length of time a call was
parked.
221 02:47
Line061 01:45