Nortel Networks T7316 - Manual (Page 120)

120 Chapter 11 System features
P0937240 03.1
Turn services on and off
The following feature codes used at a control telephone allows access and control of the
day-to-day use of services.
To turn a service on:
1 Enter the appropriate feature code from a control telephone.
2 For the Restriction service or Routing service, you will be prompted for a Password.
Enter the Service Control Password
Contact your system administrator for the current password if the default password does not
work. (Default: 23646).
3 Press NEXT to move through the schedules until the display shows the version of the service
you want turned on.
4 Press OK to select the setting, or press QUIT to exit the feature without making any changes.
To turn a service off, enter the appropriate feature code from a control telephone.
Table 10 Turning services on and off
≤°‡⁄ Turns on Ringing service. When used at the direct dial telephone,
it activates the alternate direct dial telephone (extra dial telephone).
≤£°‡⁄ Turns off Ringing service.
≤°‡¤ Turns on Restriction service.
≤£°‡¤ Turns off Restriction service.
≤°‡‹ Turns on Routing service.
≤£°‡‹ Turns off Routing service.
Caution: Assigning a service as Normal is not the same as cancelling a service using a
feature code. If you assign the service as Normal, the Normal schedule version of a service
overrides any automatic schedule and remains until you manually cancel it. When you
cancel service by feature code, you return to the automatic schedule.