Nortel Networks T7316 - Manual (Page 139)

Chapter 13 Hospitality Services 139
Telephone Features Programming Guide
To change the alarm time on a telephone:
1 Press ≤°‡fi.
The display shows Alrm: 07:00am OFF.
2 To enter a new alarm time press CHG.
The display shows Enter time: .
3 Enter a new four-digit alarm time.
4 Press ON.
5 Press DONE to exit.
When using the 24-hour clock format (hour: 00 to 23 and minutes: 00 to 59), no confirmation is
required. The display shows
Alarm ON hh:mm .
When using the 12-hour format, the display shows hh:mm AM or PM? . Press the AM or PM display
button. The display shows Alarm ON hh:mm .
To program the Alarm time feature on an analog telephone:
1 Press ≤•°‡fi.
A tone sounds.
2 Enter a four-digit alarm time.
When using the 24-hour clock format (hour: 00 to 23 and minutes: 00 to 59), a tone sounds.
When using the 12-hour format, press • to select am, or £ to select pm. A tone sounds.
At the assigned times, the telephone in the room rings to wake up or remind the occupant of the
next event or meeting.
Change or cancel an alarm time
When you enter a new Alarm time it overwrites any times previously assigned.
You can also cancel the alarm time feature. If you cancel the Alarm time for any set, it cancels the
Alarm time for all the sets in the same room.
• Press ≤ £°‡fi to cancel the Alarm time on a telephone with a display.
The display shows Alarm OFF .
• Press ˚•°‡fi to cancel the Alarm time on an analog or T7000 telephone.