Holding two calls, Put a conference on hold, Split a conference – Nortel Networks T7316 User Manual
Page 53
Chapter 3 Make a call
53
Telephone Features Programming Guide
Holding two calls
For all system telephones except the T7100 and portable telephones, you can place the two people
in a conference call on hold separately, so that they cannot talk to each other.
1
Press the line button of one call. The other call is automatically put on hold.
2
Press ≥. The second call is put on hold.
Now you can re-establish the conference.
3
Take one call off hold.
4
Press ≤‹.
5
Take the remaining call off hold.
Put a conference on hold
You can put a conference on hold, allowing the other two people to continue speaking to each other
by pressing ≥.
You can rejoin the conference by pressing either of the held line buttons. For the T7100 or portable
telephone, press ≥.
Split a conference
You can speak with one caller while the other call is on hold. You can switch between calls using
≥.
On any system telephones with line buttons:
1
Press the line button of the caller with whom you want to speak. The other call is automatically
put on hold.
2
Press ≤‹to re-establish the conference.
On a T7100 telephone:
1
Press ≤£‹. The first call is put on hold.
2
Press ≥ to switch between calls.
3
Press ≤‹ to re-establish the conference.