Nortel Networks T7316 - Manual (Page 80)

80 Chapter 6 Forward your calls
P0937240 03.1
Allowing a telephone to redirect lines
(Unified Manager Programming)
Your system administrator can determine if a telephone is allowed to redirect calls.
You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide.
Turning the redirect ring on or off
(Unified Manager Programming)
You can program a telephone to ring briefly (200 milliseconds) when you redirect a call on one of
its lines.
You need to start a Unified Manager session to program this feature. For more information about
programming using Unified Manager, see the Business Communications Manager Programming
Operations Guide
How Line Redirection is different from Call Forward
Call Forward forwards all calls that arrive at a selected telephone to an internal or external
telephone. Line Redirection redirects only the lines you define, no matter which telephones they
appear on, to a telephone outside the system.
Line Redirection takes priority over the Call Forward feature.
If both features are active on a telephone:
• Incoming external calls on redirected (trunk) lines route to the indicated Selective Line
Redirection (SLR) external destination.
• Incoming internal calls go forward to the indicated Call Forward destination.
Turn on Line Redirection
To turn on Line Redirection:
1 Press ≤°›.
2 Select the outgoing line to use for redirected calls.
3 Enter the number you need to redirect call to.
Note: If a telephone has redirect ring enabled, it rings briefly for redirected calls on one of
its lines when another telephone has set up the line redirection.