Nortel Networks T7316 - Manual (Page 168)

168 Common display prompts and error messages
P0937240 03.1
You are receiving an external call forwarded from extension221, or you
have an answer button for extension221 and an external call is ringing
on that telephone.
Another user in the system is transferring a call to you on line 061.
A camped call is waiting. Press the line button or use Call Queuing to
answer the call. Press ≥ if you have a T7100 telephone.
You tried to use Call Queuing but no call was ringing at your telephone.
There is no call ringing at your telephone. If you have a flashing line
button but your telephone is not ringing, press the line button to answer
the call on that line.
The telephone where you directed a call is not in service or is or
unavailable. The call returns to your telephone.
No one answered the call you parked. The call returns to you.
You have used the Call Queuing feature without picking up the handset.
Auto Handsfree is not been assigned to your telephone. You must use
the handset or press the handsfree button to answer a call.
You are receiving a priority call. If you are on another call, tell the
person you are speaking to that you are about to put the call on hold.
Press the flashing line indicator of the priority call or wait until the call
connects automatically (in eight seconds). The priority call goes through
after you hear the next beep. Your active call is on Exclusive Hold. It
reconnects automatically when the priority call ends (unless you transfer
the priority call, in which case you must press the line button of your
original call to reconnect). Use DND (≤°fi) or press
BLOCK to
reject a priority call.
You have no free line available to receive a call. Release one of your
current calls and try again to answer the incoming call.
You received a Ring Again offer for a line pool. Press the flashing
internal line button or
YES to use the line pool. On the T7100 telephone,
lift the handset. Otherwise, press NO or wait 30 seconds for the Ring
Again offer to expire.
While on a call, you must either release the call or put the call on hold
before you can program a feature button.
You tried to use a feature while you were on a call or had calls on hold.
Release the call or calls, before using the feature.
The line is in use. Make the call using normal methods or wait until a
line is free.
You tried to make, receive or pick up a call when no line button was
available. Some features require you to have a button free. Releasing
calls can free up line buttons.
Line061>221
Line061 transfer
Line061 waiting
No calls waiting
No line selected
Not in service
Parked call
CALLBACK
Pick up receiver
Priority> 221
BLOCK
Release a call
Use line pool?
YES
NO
Hold or release
Release calls
Line in use
No button free