Unprogrammed features, Ending feature sessions, Feature restraints – Nortel Networks T7316 User Manual
Page 153
Chapter 14 Cordless telephones and features
153
Telephone Features Programming Guide
If you know the menu item number, you can access it by the menu number:
1
Press .
2
Press the number(s) on the dialpad for the feature menu number.
Unprogrammed features
If the feature you want is not on the menu, use the following sequence to invoke the code:
1
Press .
2
Find and select FEATURE on the menu (usually item 1).
3
Press
.
4
Enter the feature code.
Or you can use one of the following shortcuts:
1
(idle line only)
Ending feature sessions
Some features are self-terminating. However, other features may establish a session that requires
user input and manual termination when the session is complete.
To manually end a feature session, press the
key.
Feature restraints
The following are some general comments about some of the constraints between the handset and
Business Communications Manager features.
•
The volume buttons on the NetVision telephone can only affect the volume of the handset.
These buttons cannot be used as a part of a programming session for Business
Communications Manager features.
•
NetVision handsets provide some system features, such as Calling Line ID, Hunt groups, and
Hospitality services.
•
The handset does not have a speaker, so it cannot receive Pages. Voice calls are received as
regular ringing calls.
FCT
SND
SND
FCT
SND
SND
FCT
<
SND
SND
END
END