Nortel Networks T7316 - Manual (Page 138)

138 Chapter 13 Hospitality Services
P0937240 03.1
To change these Hospitality settings, you need to start a Unified Manager session. For more
information about programming using Unified Manager, refer to the Business Communications
Manager Programming Operations Guide.
Hospitality passwords
The Hospitality Services allows for two types of passwords to access different areas of Hospitality
programming.
Desk admin password
Use the Desk password to access all Hospitality Services admin features. The default desk
password is: ÓØÍ∏ (4677).
Room condition password
The room condition password controls the ability to change the room condition using
≤°‡fl. The default room condition password is None. The room condition password may
remain as None.
Alarm time (AL) feature
The Alarm time feature provides an alarm clock capability on both room telephones and common
telephones which can be programmed to sound an audible alert at a requested time.
One Alarm time within a 24-hour period is programmable on a room or common telephone and
must be reset daily. When the alarm sounds, all telephones in a given room ring. If you cancel the
alarm on any telephone, it cancels the alarm on all the telephones in the room. A new Alarm time
entered on a room or common telephone overwrites any alarms previously assigned.
If the system experiences a power failure, this can result in missed Alarm times. When the system
is running and the system time resets, the missed Alarm times ring on respective room or common
telephones. The system allows a maximum of 25 telephones with alarms.
Setting the alarm time feature
To set the Alarm time feature on a telephone:
1 Press ≤°‡fi.
The display shows Alrm: 07:00am OFF.
2 If the alarm time is correct press ON.
The display shows Alrm:07:00am ON .
3 Press DONE to exit.