Chapter 3, Make a call, Chapter 3 make a call – Nortel Networks T7316 User Manual
Page 45
45
Telephone Features Programming Guide
Chapter 3
Make a call
This chapter describes the various ways you can make a call from your telephone.
The following are different ways to make a call on a digital or IP telephone, depending on the
programming and the type of call:
•
Pick up the handset and dial. Business Communications Manager supports three methods of
dialing. See
“Select how you dial your calls” on page 48
•
Pick up the handset, press a line button, and dial (if the call is not on your prime line).
•
Press ≈ and dial (to talk without using the handset). See
“Handsfree and Mute” on page 113
.
•
Press a line or intercom button, then press the handsfree button and dial to talk without the
handset. The speaker is active and the microphone is muted until you select the handsfree
button or pick up the handset.
•
Press a line or intercom button and dial to talk without the handset and if Automatic Handsfree
is programmed on your telephone.
•
Use one of the features that make dialing easier. See
Chapter 4, “Time-saving features,” on
.
The following displays show the common messages you can receive when you are handling calls.
The telephone you have called has no internal lines available. Press
LATER
to use the Ring Again or Message features or press PRIORITY
to
make a priority call.
You are dialing using Pre-dial. To erase an incorrect digit, press the left
end of √ or BKSP. When the number is complete, select a line
or lift the handset.
This prompt remains on your display while you are on a call you have
dialed. To transfer the call, press TRANSFR.
Your telephone is connected to the telephone you are trying to call.
Check your active line buttons, and return to that call.
Wait for the telephone to be answered. If no one answers, press LATER
to use the Ring Again feature (
) or Message
feature (
), or press PRIORITY to make a priority
call.
You cannot use Ring Again on your current call. You can use Ring
Again while you have a busy signal on an internal call or line pool
request or while an internal call is ringing.
The telephone you are calling has Do Not Disturb turned on. Press
LATER to use the Ring Again or Messages features, or press PRIORITY
to make a priority call.
221 busy
PRIORITY
LATER
9__
QUIT
BKSP
95551234
TRANSFR
Already joined
Calling 221
PRIORITY
LATER
Can't ring again
Do not disturb
PRIORITY
LATER