KEYENCE IL Series - Manual (Page 85)

4-2 Basic Settings and Advanced Settings
4-31 IL-E
4
Setting V
ar
iou
s F
unct
ions
Zero shift input
When the zero shift input is set to ON, the internal measurement value (R.V.) is shifted
(offset) to an arbitrary shift target value.
“3-5 Zero Shift Function (Shifting the Internal Measurement Value (R.V.))” (page 3-18)
„ Timing chart
„ Minimum Input Time
ON time: 20 ms
OFF time: 20 ms
Reset input
When the reset input is turned ON while using the hold function, the judgment value (P.V.)
in the held state is canceled and the value becomes [-----].
"6. Hold Function" (page 4-15)
„ Timing chart
„ Minimum Input Time
ON time: 20 ms
OFF time: 20 ms
Internal measurement
value (R.V.)
Max. 20 ms
Min. 20 ms Min. 20 ms
R.V. before shifted R.V. after shifted
ON
OFF
Zero shift input
Judgment value
(P.V.) judgment
output
Max. 20 ms
Min. 20 ms Min. 20 ms
Before resetting [- - - - - ]
ON
OFF
Reset input