KEYENCE IL Series - Manual (Page 38)

3-2 Operations on the Main Screens
3-6
3
Basic Oper
ations
IL-E
This section explains functions operable on the main screen and functions operable after
the display changes to each setting screen.
Functions Operable on the Main Screen
Setting Operations
DIN rail mount type (IL-1000/IL-1050) Panel mount type (IL-1500/IL-1550)
Buttons used
Main screen
Press W or X button.
Switching display on the sub display (lower level) (page 3-4)
Any of the internal measurement value (R.V.), analog output
value, HIGH side setting value, LOW side setting value or shift
target value are displayed and the settings can be changed.
3-4 Setting the Tolerance Setting Value (page 3-10)
HIGH side setting value and LOW side setting value are set. The judgment is
made among HIGH/GO/LOW, and the value is displayed and output.
3-5 Zero Shift Function (Shifting the Internal Measurement
Value (R.V.)) (page 3-18)
The internal measurement value (R.V.) can be shifted (offset)
to an arbitrary shift target value.
While pressing down [MODE], press S or T button.
3-6 Bank Function (Registering Multiple Tolerance Setting Values) (page 3-20)
HIGH side setting value, LOW side setting value, shift target
value, and analog output scaling upper / lower limit value can
be saved at up to four banks and switched.
Press [MODE] and S buttons for approx. 2 seconds.
or
Press [MODE] and T buttons for approx. 2 seconds.
3-7 Key Lock Function (page 3-21)
This function prevents unwanted button operations during measurement.
LASER
BANK 0 1 2 3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
HOLD CALC CHECK