KEYENCE IL Series - Manual (Page 106)

4-4 Calibration Function
4-52
4
Setting V
ar
iou
s F
unct
ions
IL-E
[SET] button
5
Press the [SET] button. (SET1 confirmation operation)
After [SEt1] blinks several times on the sub display (lower
level), [SET2] is displayed.
[SEt2]
6
Workpiece A is set closer to the head connected to the
expansion unit allowing for the possible workpiece
positional deviation.
The current internal measurement value is displayed on the main
display (upper level). [SEt2] and the "CALC you wish to display
(2)" are alternately displayed on the sub display (lower level).
The "CALC value you wish to display (2)" cannot be set.
The same value of "CALC value you wish to display (1)" is
displayed.
[SET] button
7
Press the [SET] button. (SET2 confirmation operation)
LASER
BANK 0 1 2 3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
HOLD CALC CHECK
CALC value
Setting you wish to display Head connected
to main unit
Expansion unit side
Workpiece A
Head connected to
expansion unit
Point
The same workpiece as point 1 is moved.