KEYENCE IL Series - Manual (Page 4)

2 IL-E
* The classification is implemented based on IEC60825-1 following the requirement of
Laser Notice No.50 of FDA (CDRH).
Safety measures for the laser
„ Laser radiation emission indicator
The laser radiation emission indicator is lit during laser emission. It flashes when laser
emission is stopped.
The position of the indicator of the IL-S025/IL-S065/IL-2000 will differ from above.
Laser emission stop input
When laser emission stop input is set as an external input, laser emission can be stopped
by turning on the external input (input response time 20 ms). Laser emission remains
stopped while the external input is on. The laser is emitted within 20 ms being external
input of the turned off. For the conditions of detection outputs and analog outputs during
laser emission stop input, refer to "11. External Input" (page 4-30) of the User's Manual.
Warming up
Leave the IL Series about 30 minutes after turning on the power.
The circuit is not stable immediately after the power turns on, so the display value may
gradually fluctuate.
Item Description
Model IL-030
IL-S025/IL-S065/IL-065/
IL-100/IL-300/IL-600/
IL-2000
Wavelength 655 nm 655 nm
FDA (CDRH)
Part1040.10 Laser Class Class 1 Laser Product* Class 2 Laser Product*
Output 220 μW 560 μW
IEC 60825-1
Laser Class Class 1 Laser Product Class 2 Laser Product
Output 220 μW 560 μW
IL-030
CENTER
A. RANGE
LASER
Laser radiation
emission indicator