KEYENCE IL Series - Manual (Page 112)

5-1 Specifications
5-4
5
Specif
ications
IL-E
*1 ± 5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected.
*2 The four external input wires are assigned with desired inputs. Rated no-voltage input: ON
voltage 2 V or less; OFF current 0.02 mA or less.
Rated voltage input is max. input rating 30 V or less, ON voltage 7.5 V or more, and OFF
current 0.05 mA or less.
*3 Rated NPN open collector output: max. 50 mA/ch (20 mA/ch when expansion units are
connected), 30 V or less, residual voltage 1 V or less. (1.5 V or less when five or more
expansion units are connected.)
Rated PNP open collector output: max. 50 mA/ch (20 mA/ch when expansion units are
connected), power voltage or less, residual voltage 2 V or less. (2.5 V or less when five or
more expansion units are connected.)
*4 When connecting five or more expansion units, ensure that the power voltage is 20 to 30 V.
*5 Use Class 2 or LPS power supply with the overcurrent protection device rated 2.5 A or less.
*6 18 W max. (Total power consumption when connecting seven expansion units and DL Series)
*7 19.5 W max. (Total power consumption when connecting seven expansion units and DL Series)
Sensor Amplifier
Model IL-1000 IL-1500 IL-1050 IL-1550
Amplifier type DIN rail mount Panel mount DIN rail mount Panel mount
Main unit/Expansion unit Main unit Expansion unit
Head compatibility Yes
Display
Minimum display unit
IL-S025/IL-030: 1 μm, IL-S065/IL-065/IL-100: 2 μm,
IL-300: 10 μm, IL-600: 50 μm, IL-2000: 100 μm
Display range
IL-S025/IL-030/IL-S065/IL-065/IL-100:
± 99.999 mm to ± 99 mm (Variable to 4 levels)
IL-300/IL-600: ± 999.99 mm to ± 999 mm (Variable to 3 levels)
IL-2000: ± 9999.9 to ± 9999 (Variable to 2 levels)
Display rate Approx. 10 times/sec
Analog voltage output *1
± 5 V, 1 to 5 V, 0 to 5 V
Output impedance 100 Ω
No
Analog current output *1
4 to 20 mA
Maximum load resistance 350 Ω
Control
input
*2
Bank switching input
No-voltage input
Zero shift input
Emission stop input
Timing input
Reset input
Control
output
*3
Judgment output Open collector (NPN/PNP switchable, N.O./N.C. switchable)
Alarm output Open collector (NPN/PNP switchable, N.C. switchable)
Power
supply
Power voltage *4
10 to 30 VDC, including ripple (P-P) 10%
Class2 or LPS *5
Supplied from main unit
Power
consumption
(without load) 2300 mW or
less (at 30 V,
77 mA max.) *6
2500 mW or
less (at 30 V,
84 mA max.) *7
2000 mW or
less (at 30 V,
67 mA max.)
2200 mW or
less (at 30 V,
74 mA max.)
Environmental
resistance
Ambient temperature -10 to +50°C (No freezing)
Relative humidity 35 to 85% RH (No condensation)
Vibration
10 to 55 Hz, 1.5 mm double amplitude,
2 hours each for X, Y, Z axes
Pollution degree 2
Materials Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Mass (including accessories) Approx. 150 g Approx. 170 g Approx. 140 g Approx. 160 g