KEYENCE IL Series - Manual (Page 39)

3-2 Operations on the Main Screens
3-7 IL-E
3
Basic Oper
ations
Available Functions from the Main Screen
Main screen
Press [MODE] button for approx. 2 seconds.
4-2 Basic Settings and Advanced Settings (page 4-4)
Basic settings
Basic settings such as measurement mode, response time
are made.
Advanced settings
More advanced settings such as hold function, delay timer
enable the unit to be used in wider applications.
Press [MODE] and W buttons for approx. 2 seconds.
4-3 Calculation Function (page 4-42)
The internal measurement value (R.V.) of two sets of the
sensor amplifier can be calculated (addition or subtraction).
Press [MODE] and X buttons for approx. 2 seconds.
4-4 Calibration Function (page 4-45)
When there is a difference between the internal
measurement value (R.V.) or calculated value (CALC value)
and the actual dimension of the object, the value can be
calibrated.
While pressing the [MODE] button, press the [SET] button 5
times.
3-3 Initial Reset (Initialize) (page 3-8)
All settings, excluding the calibration function, are initialized.
LASER
BANK 0 1 2 3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
HOLD CALC CHECK