KEYENCE IL Series - Manual (Page 41)

3-3 Initial Reset (Initialize)
3-9 IL-E
3
Basic Oper
ations
If the model of the connected head has been changed, the zero shift function and
calibration function must be initialized.
The following display will appear when the connected head's model is changed.
1
Connect the head of different model into the amplifier.
[rESET] will appear on the main display, and [Y.or.n] will appear on the sub display.
2
Press S/T button to select [yes] and press the [MODE] button.
When [yes] is selected, all functions including the calibration function will be
initialized. After the initialization is complete, [End] blinks several times on the sub
display and the main screen is restored. When [no] is selected, the main screen is
restored. The zero shift function and calibration function will not be initialized.
Operation for Changing the Model of Connected Head
GO
;QTP
LASER
BANK 0
1
2 3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
T'5'V HOLD CALC CHECK