KEYENCE IL Series - Manual (Page 18)

1-2 Part Names and Functions
1-6
1
Bef
ore Use
IL-E
Amplifier control unit
„ DIN rail mount type (IL-1000/IL-1050)
„ Panel mount type (IL-1500/IL-1550)
(11) (12) (10) (6)
(16) (15) (14)
(1)
(2)
(3)
(4)
(7) (8) (9)
(13)
(5)
Item Description
(1) Main display Displays the judgment value (P.V.) and each setting item.
(2) Laser warning emission
indicator Lights up while the laser beam is being emitted.
Blinks while the laser beam emission is stopped.
(3) Judgment indicator
Displays whether the judgment value (P.V.) is HIGH (over the
upper limit), GO (within the acceptable range) or LOW (below
the lower limit) against the tolerance setting value.
"3-4 Setting the Tolerance Setting Value" (page 3-10)
(4) Analog range indicator
Lights up when the P.V. (judgment value) is within the analog
output range. If the analog output setting is OFF, or when
using the expansion unit, the indicator lights within the
following detection range.
• IL-S025: 25 ± 5 mm
• IL-030: 30 ± 5 mm
• IL-S065/IL-065: 65 ± 10 mm
• IL-100: 100 ± 20 mm
• IL-300: 300 ± 140 mm
• IL-600: 600 ± 400 mm
• IL-2000: 2000 ± 1000mm
(11) (12) (10) (6)
(16) (15) (14)
(1)
(2)
(3)
(4)
(5)
(7) (8) (9)
(13)