KEYENCE IL Series - Manual (Page 62)

4-2 Basic Settings and Advanced Settings
4-8
4
Setting V
ar
iou
s F
unct
ions
IL-E
Set whether the display value increases or decreases when the object approaches the
sensor head.
Set the measurement sampling rate.
Normally the default value is used, but to sample at a faster rate, set a fast rate, and if the
incoming light amount is low, set a slower rate.
* As for dEFLt, IL-S025/IL-030/IL-S065/IL-065/IL-100 is 1ms, IL-300/IL-600 is 2 ms, and IL-2000
is 5 ms.
1. Measurement Direction &KT
Measurement
increase/decrease
direction
Description
Default
value
Normal
The display value increases when the object approaches the
sensor head.
c
Reverse
The display value decreases when the object approaches
the sensor head.
0
99.999
−99.999
Display value
Measurement value
0
99.999
−99.999
Display value
Measurement value
2. Sampling Rate 52&
Item Setting range
Default
value
Sampling rate dEFLt / 0.33 /1 / 2 / 5 (ms) dEFLt