CANOGA PERKINS 9171 Command Reference - Manual (Page 696)

CanogaOS Command Reference
40-25
Examples
The following example shows the status of NTP associations:
Switch# show ntp associations
Current NTP associations:
remote refid st when poll reach delay offset disp
=================================================================
2.2.2.2 0.0.0.0 16 - 64 0 0.000 0.000 3992.17
* synchronized, + candidate, # selected, x falsetick, . excess, - outlyer
Related Commands
show ntp status
40.37 show ntp key
To show the NTP keys, use the show ntp key command in privileged EXEC mode.
Command Syntax
show ntp key
Command Mode
Privileged EXEC
Usage
Use this command to display the NTP keys.
Examples
The following example shows the keys of NTP:
Switch# show ntp key
Current NTP key configuration:
============================================================
1 abcd
64000 KKKK
Related Commands
show ntp association
ntp key
40.38 show ntp status
To show the status of the Network Time Protocol (NTP), use the show ntp status command in
privileged EXEC mode.