CANOGA PERKINS 9171 Command Reference - Manual (Page 455)

CanogaOS Command Reference
25-43
Command Mode
Router mode
Defaults
The default is 15 seconds.
Examples
In the following example, the targeted-peer-hello-interval command is used to
set the interval for sending unicast hello packets to targeted peers:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# targeted-peer-hello-interval 100
Related Commands
show ldp
targeted-peer-hello-interval
25.48 targeted-peer-hello-receipt
Use this command to toggle the receipt of targeted hello packets. Use the no
parameter to disable the processing of targeted hello packets.
Command Syntax
(no) targeted-peer-hello-receipt
Syntax description
This command has no arguments and keywords.
Command Mode
Router mode
Defaults
This command has no default settings.
Examples
In the following example, the targeted-peer-hello-receipt command is used to
toggle the receipt of targeted hello packets:
Switch# configure router
Switch(config)# router ldp
Switch(config-router)# targeted-peer-hello-receipt