3 ip verify source – CANOGA PERKINS 9171 Command Reference User Manual
Page 626

CanogaOS Command Reference
35-2
number
Specify maximum number of bindings. The range is 0 to 30.
Default
Maximum number is 10.
Command Mode
Global configuration
Usage
Examples
The following example shows how to specify the maximum number of bindings:
Switch(config)# ip source maximal binding per-port 20
Related Commands
35.3 ip verify source
Use the ip verify source interface configuration command on the switch stack or on a standalone switch
to enable IP source guard on an interface. Use the no form of this command to disable IP source guard.
Command Syntax
ip verify source {ip | ip-mac | ip-mac-vlan}
no ip verify source
ip
Check only IP address.
ip-mac
Check only IP address and MAC address.
ip-mac-vlan
Check IP address, MAC address, and VLAN.
Default
IP source guard is disabled on interfaces.
Command Mode
Interface configuration
Usage
When IP source guard is enabled on an access port, the ip-mac-vlan keyword is equivalent to the
ip-mac keyword.
Examples
The following example shows how to enable IP source guard on an interface:
Switch(config-if)# ip verify source ip-mac
Related Commands