17 show startup-config, 18 write – CANOGA PERKINS 9171 Command Reference User Manual
Page 666
CanogaOS Command Reference
39-13
39.17 show startup-config
To display the contents of the currently running configuration file or the configuration for a specific class
map, interface, map class, policy map, or routing protocols, use the show startup-config command in
privileged EXEC mode.
Command Syntax
show startup-config
Default
The show startup-config command without any arguments or keywords displays the entire contents of
the startup configuration file in flash:.
Command Mode
privileged EXEC
Usage
Examples
The following example shows the configuration for serial interface 1:
Switch# show startup-config
Building configuration...
Current configuration:
......
!
interface eth-0-1
no switchport
ip address 192.168.0.1/24
shutdown
......
end
Related Commands
configure terminal
show running-config
39.18 write
Command Syntax
write file
Command Mode