CANOGA PERKINS 9171 Command Reference - Manual (Page 394)

CanogaOS Command Reference
23-5
23.8 show mvr group
Use this command to show mvr group learned from receiver port.
Command Syntax
show mvr groups [vlan vlan [A.B.C.D] ]
vlan: show mvr groups in a specified vlan
Vlan: <1-4094> vlan id
A.B.C.D: multicast group address
Command Mode
Privileged EXEC
Usage
Show mvr group information learned from receiver port
Examples
Switch#show mvr groups
VLAN Interface Group-Address Uptime Expires-time
2 eth-0-1 238.255.0.1 00:01:00 00:04:00
Related Commands
None
23.9 show mvr group static
Use this command to show mvr global static groups.
Command Syntax
show mvr groups static global
Command Mode
Privileged EXEC
Usage
Show mvr global static groups
Examples
Switch(config)# mvr group 239.255.0.1 10
Switch(config)#quit
Switch# show mvr groups static global
MVR Static Global Group: