CANOGA PERKINS 9171 Command Reference - Manual (Page 320)

CanogaOS Command Reference
18-1
18 VRRP Remote Tracking Commands
18.1 IP SLA MONITOR
To create an IP SLA entry and enter IP SLA monitor configuration mode, use ip
sla monitor in CONFIG mode.
To delete an IP SLA entry, use the no form of this command.
Command Syntax
ip sla monitor entrynumber
no ip sla monitor entrynumber
Syntax Description
entrynumber Entry number is used to identify ip sla monitor
entry, its range is from 1 to 500;
Command Mode
Global configuration
Defaults
none
Examples
In the following example, the ip sla monitor command is used to create an ip sla monitor entry:
Switch(config)#ip sla monitor 1
Switch(config-ipsla)#
Related Commands
Show ip sla monitor
18.2 TYPE ECHO PROTOCOL IPICMPECHO
Defines an Echo operation with icmp packet and enters destination ip address
or hostname.
To delete an Echo operation and destination ip address or hostname. use the
no form of this command.
Command Syntax
type echo protocol ipIcmpEcho
(destination-ip-address|destination-hostname)
no type echo protocol ipIcmpEcho
Syntax Description