CANOGA PERKINS 9171 Command Reference - Manual (Page 672)

CanogaOS Command Reference
40-1
40 System Management Commands
40.1 show version
To display the basic version information in a device, use the show version command in privileged
EXEC mode.
Command Syntax
show version
Command Mode
Privileged EXEC
Usage
User can get the basic version information about the system.
Examples
The following is sample output from the show version command:
Switch# show version
C
anogaOS Software, 9170, Version 2.3.1, 9170
Copyright (C) 2004-2009 C
anoga Perkins, All rights reserved.
The current running image is flash:/boot/canogaos-9170-ma-v2.3.1.fcs.r.bin
Switch uptime is 0 days, 3 hours, 37 minutes
Hardware Type is
9170-1
Hardware Version is
1.1
SDRAM size 256M
Flash size 64M
EPLD Version is 1
BootRom Version is v1.1
System serial number is 20100122832
Related Commands
40.2 ip ssh server
To enable SSH service, use ip ssh server enable command in global configuration mode. To disable
SSH service, use ip ssh server disable command.
Command Syntax
ip ssh server {enable | disable}