CANOGA PERKINS 9171 Command Reference - Manual (Page 552)

31-13
This example shows how to configure the cos trust state to port.
Switch(config-if)# trust cos
Related Commands
no trust
31.18 replace cos
Use this command to replace the cos field in packets on egress.
To remove this setting, use the no form of this command.
Command Syntax
replace cos
no replace cos
Command Mode
Interface configuration
Usage
None
Examples
This example shows how to replace the cos field in packets on egress.
Switch(config-if)# replace cos
This example shows how to remove this setting,
Switch(config-if)# no replace cos
Related Commands
replace dscp
31.19 replace dscp
Use this command to replace the dscp field in packets on egress.
To remove this setting, use the no form of this command.
Command Syntax
replace dscp
no replace dscp
Command Mode
Interface configuration
Usage
CanogaOS Command Reference