CANOGA PERKINS 9171 Command Reference - Manual (Page 673)

CanogaOS Command Reference
40-2
enable Turn on the SSH service.
disable Turn off the SSH service.
Default
SSH service is enabled.
Command Mode
Global configuration
Usage
Examples
The following example enables the SSH service on your switch:
Switch(config)# ip ssh server enable
Related Commands
show ip ssh server status
40.3 ip ssh server authentication-retries
To configure Secure Shell (SSH) authentication retry times on your switch, use the ip ssh server
authentication-retries command in global configuration mode. To restore the default value, use the no
form of this command.
Command Syntax
ip ssh server authentication-retries integer
no ip ssh server authentication-retries
integer The number of retries, with a maximum of 6 authentication retries.
Default
The default is 6.
Command Mode
Global configuration
Usage
Examples
The following examples configure SSH authentication retry times on your switch:
Switch(config)# ip ssh server authentication-retries 3
Related Commands