CANOGA PERKINS 9171 Command Reference - Manual (Page 521)

CanogaOS Command Reference
29-3
Syntax Description
NAME Identifying string for VPLS instance.
VPLS-ID Identifying value for VPLS instance, the range
should be from 1 to 4294967295.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the mpls vpls command is used to create a VPLS
instance and come into the VPLS instance mode:
Switch # configure terminal
Switch (config)# mpls vpls vpls1 1
Switch (config-vpls)#
Related Commands
29.4 no mpls vplsno mpls vpls
Use this command to remove a VPLS instance.
Command Syntax
no mpls vpls NAME
Syntax Description
NAME Identifying string for VPLS instance.
Command Mode
Configure mode
Defaults
This command has no default settings.
Examples
In the following example, the no mpls vpls command is used to remove a
VPLS instance:
Switch# configure terminal
Switch(config)# no mpls vpls vpls1
Related Commands
mpls vpls