CANOGA PERKINS 9171 Command Reference - Manual (Page 429)

CanogaOS Command Reference
25-17
MPLS/BGP VPNs.Use the no parameter to stop sending
explicit-null labels for directly connected FECs, and resume
sending implicit-null labels for them.
Command Syntax
(no) explicit-null
Syntax Description
This command has no arguments or keywords.
Command Mode
Router mode
Defaults
Sends implicit-null labels.
Examples
In the following example, the explicit-null command is used to send
explicit-null labels for directly connected FECs instead of implicit-null labels:
Switch# configure terminal
Switch(config)# router ldp
Switch(config-router)# explicit-null
Related Commands
show ldp FEC
25.19 hello-interval
Use this command to set the interval after which hello packets are sent out.
Use the no parameter to revert to default hello interval.
Command Syntax
(no) hello-interval number
Syntax Description
number Interval for sending periodic hello message to
peers, the range is 1 to 21845