CANOGA PERKINS 9171 Command Reference - Manual (Page 373)

CanogaOS Command Reference
21-6
21.9 ip igmp query-interval
Use this command to set the igmp query interval.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp query-interval <2-18000>
no ip igmp query-interval
<2-18000>: the value of igmp query interval
Command Mode
Interface configuration
Defaults
125 seconds
Usage
None
Examples
This example shows how to set the igmp query interval to 300 seconds.
Switch(config-if)# ip igmp query-interval 300
This example shows how to return the igmp query interval to default value.
Switch(config-if)# no ip igmp query-interval
Related Commands
ip igmp querier-timeout
ip igmp query-max-response-time
21.10 ip igmp query-max-response-time
Use this command to set the igmp query max response time.
To return it to default value, use the no form of this command.
Command Syntax
ip igmp query-max-response-time <1-25>
no ip igmp query-max-response-time
<1-25>: the igmp query max response time
Defaults
10 seconds
Command Mode
Interface configuration