CANOGA PERKINS 9171 Command Reference - Manual (Page 155)

CanogaOS Command Reference
9-7
9.13 l2protocol-tunnel tunnel-dmac MAC
Use this command to l2protocol tunnel destination MAC address.
Command Syntax
l2protocol-tunnel tunnel-dmac MAC
No l2protocol-tunnel tunnel-dmac
MAC : BPDU tunnel’s destination MAC address, could be 0100.0CCD.CDD0-D2 or 010F.E200.0003
Command Mode
Global configuration
Usage
Use this command to l2 protocol tunnel dmac to 010F.E200.0003. System default tunnel-dmac is
0100.0ccd.cdd0.
Examples
Switch(config)# l2protocol-tunnel tunnel-dmac 010F.E200.0003
Related Commands
show l2protocol-tunnel
9.14 l2protocol-tunnel stp
Use this command to enable stp tunnel on port.
Command Syntax
l2protocol-tunnel stp
no l2protocol-tunnel stp
Command Mode
Interface configuration
Usage
Use this command to enable stp tunnel on port.
Examples
Switch(config-if)# l2protocol-tunnel stp
Related Commands
show l2protocol-tunnel