CANOGA PERKINS 9171 Command Reference - Manual (Page 124)

CanogaOS Command Reference
7-21
Usage
Examples
Switch# clear spanning-tree detected protocols bridge 2
Related Commands
7.33 clear spanning-tree disabled-port
Use this command to clear all spanning tree protocol disabled port.
Command Syntax
clear spanning-tree disabled-port
Command Mode
Privileged Exec mode
Default
Usage
Examples
Switch# clear spanning-tree detected protocols bridge 2
Related Commands
7.34 show spanning-tree
Use this command to show the state of the spanning tree. This command only show UP interface’s state.
Command Syntax
show spanning-tree
Command Mode
Privileged Exec modes
Default
Usage
The following is an output of this command displaying the spanning tree.
Switch#show spanning-tree
Bridge up - Spanning Tree Enabled