CANOGA PERKINS 9171 Command Reference - Manual (Page 404)

CanogaOS Command Reference
24-9
Command Syntax
ip pim register-suppression <1-65535>
no ip pim register-suppression
<1-65535>: register suppression time in seconds
Defaults
60s
Command Mode
Global configuration
Usage
None
Examples
This example shows how to set the register suppression time to 100s.
Switch(config)#ip pim register-suppression 100
This example shows how to return the register suppression time to default value.
Switch(config)#no ip pim register-suppression
Related Commands
ip pim register-rate-limit
ip pim register-rp-reachability
ip pim register-source
24.15 ip pim rp-address
Use this command to set the pim rp (rendezvous point) address.
To remove it, use the no form of this command.
Command Syntax
ip pim rp-address address [ [ access-list ] override ]
no ip pim rp-address
address: the rp address
access-list: the name of an access-list
override: Overrides dynamically learned RP mappings
Command Mode
Global configuration
Usage
None
Examples