CANOGA PERKINS 9171 Command Reference - Manual (Page 425)

CanogaOS Command Reference
25-13
25.13 debug ldp qos
Use this command to write Quality of Service information to the output.
Note:
On using a debug command, the router continues to generate an
output until the no parameter is used with the command. The
debug output and system error messages are written on the
virtual terminal. Use the log file or log syslog command in
configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp qos
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp qos command is used to write Quality
of Service information to the output:
Switch# debug ldp qos
Related Commands
debug ldp fsm
debug ldp packet
25.14 debug ldp tsm
Use this command to write trunk state machine specific information to the
output.
Note:
On using a debug command, the router continues to generate an