CANOGA PERKINS 9171 Command Reference - Manual (Page 45)

CanogaOS Command Reference
4-1
4 Interface Commands
4.1 line console
Use this command to enter line configuration mode and configure the console port.
Command Syntax
line console line-number
Command Mode
Global configuration
Usage
This command is used to enter line configuration mode and configure the console port.
Examples
This example shows how to enter line configuration mode:
Switch(config)# line console 0
Switch(config-line)#
This example shows how to exit line configuration mode
Switch(config-line)# exit
Switch(config)#
Related Commands
exit
4.2 line vty
Use this command to enter vty line configuration mode.
Command Syntax
line vty line-number
line-number: <0-7> line number for virtual terminal
Command Mode
Global configuration
Usage
None
Examples
This example shows how to enter vty line configuration mode:
Switch(config)# line vty 0