CANOGA PERKINS 9171 Command Reference - Manual (Page 319)

CanogaOS Command Reference
17-7
Related Commands
router vrrp
17.9 show vrrp
To display a brief or detailed status of one or all configured Virtual Router Redundancy Protocol (VRRP)
groups on the router, use the show vrrp command in privileged EXEC mode.
Command Syntax
show vrrp [group]
group (Optional) Virtual router group number of the group for which information is to be
displayed.
Command Mode
Privileged EXEC
Usage
If no group is specified, all groups are displayed.
Examples
The following is sample output from the show vrrp command:
Switch# show vrrp
VRID <1>
State : Master
Virtual IP : 10.0.20.254(Not IP owner)
Interface : eth-0-10
VMAC : 0000.5e00.0101
Advt timer : 1
Preempt mode : TRUE
Auth type : NONE
Conf pri : 200 Run pri : 200
Master router ip : 10.0.20.1
Master priority : 200
Master advt timer : 1
Master down timer : 3
Learn master mode : FALSE
Related Commands
router vrrp