CANOGA PERKINS 9171 Command Reference - Manual (Page 426)

CanogaOS Command Reference
25-14
output until the no parameter is used with the command. The
debug output and system error messages are written on the
virtual terminal. Use the log file or log syslog command in
configure mode to redirect the debugging output to a file or the
syslog.
Command Syntax
(no) debug ldp tsm
Syntax Description
This command has no arguments or keywords.
Command Mode
Privileged Exec mode
Defaults
This command has no default settings.
Examples
In the following example, the debug ldp tsm command is used to write trunk
state machine specific information to the output:
Switch# debug ldp tsm
Related Commands
debug ldp fsm
debug ldp packet
25.15 debug ldp vc
Use this command to debug Layer-2 Virtual Circuit information.
Command Syntax
(no) debug ldp vc {dsm | usm | events}
Syntax Description
dsm Downstream state machine
usm Upstream state machine
events VC events
Command Mode
Privileged Exec mode