CANOGA PERKINS 9171 Command Reference - Manual (Page 525)

CanogaOS Command Reference
29-7
Related Commands
no vpls-peer
29.10 no vpls-peer
Use this command to remove a remote PE from VPLS instance.
Command Syntax
no vpls-peer A.B.C.D
Syntax Description
A.B.C.D IP address of the peer node to be removed.
Command Mode
VPLS mode
Defaults
This command has no default settings.
Examples
In the following example, the no vpls-peer command is used to remove a
remote PE from VPLS instance:
Switch# configure terminal
Switch (config)#mpls vpls vpls1 1
Switch (config-vpls)# no vpls-peer 100.100.100.1
Related Commands
vpls-peer
29.11 vpls-fib-add
Use this command to add a static PW for a PE in a VPLS instance.
Note:
The peer should be added in VPLS instance use key-word
“manual”.
Command S yntax
vpls-fib-add NAME peer A.B.C.D IN-LABLE OUT-LABEL
Syntax Description
NAME Identifying string for VPLS instance.
A.B.C.D IP address of PE.
IN-LABLE Incoming label, the range should be from 16 to