CANOGA PERKINS 9171 Command Reference - Manual (Page 315)

CanogaOS Command Reference
17-3
Command Syntax
interface interface-name
no interface
interface-name Interface name.
Default
No interface is specified.
Command Mode
Router configuration
Usage
Examples
The following is sample output from the interface command:
router vrrp 1
interface eth-0-1
Related Commands
router vrrp
17.4 preempt-mode
To configure the router to take over as master virtual router for a Virtual Router Redundancy Protocol
(VRRP) group if it has higher priority than the current master virtual router, use the preempt-mode
enable command in router mode. To disable this function, use the preempt-mode disable command.
Command Syntax
preempt-mode {true | false}
Default
Preemption mode is enabled.
Command Mode
Router configuration
Usage
By default, the router being configured with this command will take over as master virtual router for the
group if it has a higher priority than the current master virtual router.
Examples
The following example configures the router to preempt the current master virtual router when its priority